The sleeve anchor is a type of fastener used for securing objects to masonry, brick, and other non-threaded surfaces. It is a metal sleeve that is inserted into a hole. Once inserted, it is held in place by a nut.
Sleeve anchors are a good choice for securing heavy weights to a hard surface, such as concrete or stone. They also offer easy fixture removal. However, their efficiency depends on the masonry substrate they are being used on. For example, a sleeve anchor will not work as well with wood, fiberglass, or other materials.
When installing a sleeve anchor, it is important to clean out the hole. Any debris that is left behind can compromise the anchor's grip on the base material. In addition, it is best to drill the hole in the same diameter as the bolt.
Sleeve anchors are available in different sizes and styles. Some anchors feature a flat head for easier installation, while others feature a finished hex head. Depending on the model, you may need to use a torque wrench.
The power of the anchor bolt depends on the weight of the object it is holding. If the item weighs more than a certain limit, you will need to invest in a heavier, longer bolt.
To install a sleeve anchor, you will need to first drill a hole in the concrete. This hole should be the same diameter as the bolt and slightly longer.
After you have drilled a hole in the concrete, you will need to insert the anchor into the hole. You can then tighten the bolt.
shellyn-anchor.com